Removing The Raid Ddr2 Dimm - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

11. Install the memory board or the memory board air baffle into Slot C. For instructions, see
"Cold Insertion of a Memory
12. Install the top cover. For instructions, see

Removing the RAID DDR2 DIMM

1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see
5. Remove the memory board or the memory board air baffle from Slot C. For instructions, see
"Cold Removal of Memory
6. Gently spread the retaining clips at each end of the RAID DIMM socket. The DIMM lifts from
the socket.
7. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
8. Close the latches.
9. Install the memory board or the memory board air baffle into Slot C. For instructions, see
"Cold Insertion of a Memory
10. Install the top cover. For instructions, see
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
Board".
"Installing the Top
"Removing the Top
Board".
Board".
"Installing the Top
Cover".
"Safety Information"
Cover".
Cover".
199