Installing A Processor; Figure 95. Open Processor Socket Lever - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

Installing a Processor

NOTES
Failure to correctly apply thermal grease between a processor and the heat
sink could cause damage to the server.
Populate the processor sockets in order, beginning with the CPU_1 socket.
To install a processor:
1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the server.
3. Power down the server and unplug both AC power cords.
4. Remove the top cover. For instructions, see
5. Remove the processor air baffle. For instructions, see
6. If a Processor Thermal Blank is installed, remove it. For instructions, see
Processor Thermal
7. Verify that the processor release mechanism is in the open position. See Figure 95.
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
Blank".

Figure 95. Open Processor Socket Lever

"Safety
"Removing the Top Cover".
"Removing the Processor Air
TP01424
Information".
Baffle".
"Removing a
183