Configuring Sdrs And Frus - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

Service Technicians Guide
If your server has the Intel
options are included by default:
Load FRUs and SDRs onto this server
Configure Channels on this server
Configure Users on this server
Configure Advanced Features on this server
After you decide which of the options to program and press the Continue button, the SCW will exit
from the graphical user interface mode and begin programming the options. If you do not select any
options, the SCW will exit.
Selecting or deselecting options on this screen does not affect the existing state of the options on
the server. If you check an option, it only implies that you intend to configure it. If you do not
select an option, it only implies that you do not want to make any changes to that option while
using SCW; it does not disable the option on the server.
After you press Continue, you are brought to a screen on which you need to set the date and time on
the server. The date and time are saved as soon as you press Continue. This screen also shows you
the versions of the HSC, firmware, and BIOS that are installed on the server.

Configuring SDRs and FRUs

Sensor Data Records (SDRs)
Before the Sensor Data Records can be loaded, you must provide information about your server.
This information is gathered through a series of screens. The actual questions differ depending on
the configuration of the server. You might be asked for the type of main board, the chassis, and the
type and number of fans that are in the platform.
Field Replaceable Units (FRUs)
Each server comes with the FRUs pre-programmed, but you may want to refresh them from a
current Intel® Server Platforms SR4850HW4 and SR6850HW4 Deployment Toolkit CD. The SCW
supports loading ASCII FRU data from a file similar to the FRUSDR Load Utility's
MASTER.CFG file. This file is called SCW_<platform>.CFG. The file is modified to remove
many of the prompt text entries of the MASTER.CFG file so that the SCW can go directly to the
pertinent hardware-specific questions you will need to answer. The SCW will refresh the FRUs
when the option "Load FRUs and SDRs onto this server" is selected.
82
®
Management Module –Advanced Edition installed, the following
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide