Servicing the Server Boards
Installing the Power Distribution Board
To install the power distribution board:
1. Observe the safety precautions, warnings, and cautions described in
5.
2. Set the power distribution board in place. See letter "A" in Figure 121.
3. Use the seven screws to secure the power distribution board to the chassis. See letter "B" in the
figure.
4. Install the SCSI backplane board. For instructions, see
page 216.
5. Install the power supplies. For instructions, see
6. Install the main board. For instructions, see
7. Install the top cover. For instructions, see
218
"Installing the Top
A
B
Figure 121. Installing the Power Distribution Board
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
"Safety
"Installing the SCSI Backplane
"Supply", page
148.
"Installing the Main
Board", page 213.
Cover", page 140.
Information", page
Board",
TP01564