Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual page 9

Product guide
Table of Contents

Advertisement

A microprocessor and heat sink may be hot if the system has been running. In addition, there
may be sharp pins and edges on some board and chassis parts. Contact should be made
with care. Consider wearing protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Dispose of used batteries
according to manufacturer's instructions.
The system is designed to operate in a typical office environment. Choose a site that is:
Clean and free of airborne particles (other than normal room dust).
Well-ventilated and away from sources of heat including direct sunlight.
Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by electrical devices.
In regions that are susceptible to electrical storms, we recommend you plug your system into
a surge suppresser and disconnect telecommunication lines to your modem during an
electrical storm.
Provided with a properly grounded wall outlet.
Provided with sufficient space to access the power supply cord(s), because they serve as the
product's main power disconnect.
Servers can be too heavy for a single person to lift or move safely. Depending on the server,
use two people or a mechanical assist to lift or move the server.
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR4850HW4 - Server Platform - 0 MB RAM and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents