Installing A Non-Hot-Plug Pci Card - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

Service Technicians Guide
6. Rotate the retention latch at the rear of the card slot into the up position. See letter "A" in
Figure 70.
7. Pull up on the card to remove it.
8. Place the PCI card on a clean, static-free work surface or inside a static-free plastic bag.
9. Install an expansion slot cover over the empty slot or install a replacement PCI card:
-
To install an expansion slot cover: align the cover with the slot from the rear of the
chassis. Press the cover into the slot. Rotate the bracket at the rear of the chassis into the
down position. See letter "C" in Figure 70.
-
To install a replacement PCI card: see
10. Install the top cover. For instructions, see

Installing a Non-Hot-plug PCI Card

1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see
5. Being careful not to touch the components or the gold edge connectors on the PCI card, remove
it from its protective wrapper. Place the card component-side up on a clean, static-free work
surface.
6. Record the serial number of the PCI card in your
7. Rotate the retention latch at the rear of the card slot into the up position. See letter "A" in
Figure 72.
8. If necessary, remove the expansion slot cover in the slot you are using by sliding it up from
inside the chassis. See letter "B" in Figure 72.
9. Align and slide the adapter board down until it seats in its connector. If you are installing a full-
length card, guide the front of the card into the slot shown by letter "D" in Figure 72.
10. Press the card down firmly until it seats into the slot.
11. Rotate the retention latch at the rear of the card slot into the down position.
12. Attach the required cables to the PCI card.
13. Install the top cover. For instructions, see
150
"Installing a Non-Hot-plug PCI
"Installing the Top
"Removing the Top
"Equipment
"Installing the Top
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
Card".
Cover".
"Safety Information"
Cover".
Log".
Cover".