Table of Contents
Advertisement
Service Technicians Guide
4. Open the plastic levers on each end of the DIMM socket(s). See letter "A" in Figure 81.
5. Remove the DIMM from its antistatic container. Hold the DIMM only by the edges. Do not
touch the components or gold edge connectors.
6. Install DIMMs in the correct order. See Figure 81 and
7. Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with
the key in the DIMM socket. See letter "B" in Figure 81.
8. Insert the bottom edge of the DIMM into the socket. See letter "C" in the figure.
9. Push down on the top edge of the DIMM. The levers at each end of the DIMM socket will
close. Make sure the levers close securely. See letter "D" in the figure.
162
B
C
D
A
Figure 81. Install DIMMs
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
"Rules for Adding
Memory".
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
TP01440
Advertisement
Table of Contents
Troubleshooting
