Create The Dos-Bootable Usb Flash Memory Device - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

Remove all media from the Intel
Disconnect/remove all hard disk drives
Make sure the CD-ROM/DVD-ROM drive does not contain a disk

Create the DOS-bootable USB Flash Memory Device

1. Power off the server.
2. Attach the USB floppy disk drive to a USB connector on the server.
3. Attach the USB flash memory device to a USB connector on the server.
4. Power on the server.
5. When you see the following screen, press any key to enter the System Option Menu.
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
®
Server Platform SR4850HW4 and SR4850HW4/M:
227