Replacing The Power Distribution Board; Removing The Power Distribution Board - Intel SR4850HW4 - Server Platform - 0 MB RAM Product Manual

6. Connect the cables you disconnected during the removal process from the SCSI backplane
board. For connection locations, see Figure 84.
7. Install the main board. For instructions, see
8. Install the top cover. For instructions, see
9. Install the hot-swap hard drives and hard drive carriers. For instructions, see
Disk Drive".

Replacing the Power Distribution Board

The power distribution board provides the output power interface between the hot-swap power
supplies and the main board.

Removing the Power Distribution Board

To remove the power distribution board:
1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the power supplies. For instructions, see
5. Remove the top cover. For instructions, see
6. Remove the main board. For instructions, see
7. Remove the SCSI backplane board. For instructions, see
Board".
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
"Installing the Main Board".
"Installing the Top Cover".
"Removing a Power
"Removing the Top Cover".
"Removing the Main
"Removing the SCSI Backplane
"Installing a Hard
"Safety Information".
Supply".
Board".
219