Table of Contents
Advertisement
Error Code
Error Message
9024
Processor component was not configured
5224
Fatal error occurred on last Boot
POST Error Beep Codes
The following table lists POST error beep codes. Prior to system video initialization, the BIOS uses
beep codes to inform users on error conditions. The beep code is followed by a user visible code on
POST Progress LEDs.
Table 25.
Beep Codes
Beeps
Error Message
1
Fatal error
2
Processor error
3
Memory error
4
Main board error
1-5-1-1
1-5-2-1
1-5-2-2
1-5-2-3
1-5-2-4
1-5-4-2
1-5-4-3
1-5-4-4
BIOS Recovery Beep Codes
Table 26.
BIOS Recovery Beep Codes
Beeps
Error Message
1
Recovery Started
2
Recovery Boot Error
4 long high-
Recovery Complete
pitched
beeps
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
Severity
Minor
Major
Description
System halted because of an unspecified fatal error that was
detected.
System halted because a fatal error related to a processor was
detected.
System halted because a fatal error related to the memory was
detected.
System halted because a fatal error related to the main board
hardware was detected.
FRB3 failure (processor failure)
CPU: empty slot
CPU: no processors
CPU: configuration error (example VID mismatch)
CPU: Configuration error (example BSEL mismatch)
Power fault: DC power unexpectedly lost (power control failure)
Chipset control failure
Power control fault (Usually a VRM is not installed.)
POST Progress Code
Description
E9h
Start of recovery process
Flashing series of
Unable to boot to floppy, ATAPI, or ATAPI
POST codes: EFh,
CD-ROM. Recovery process will retry.
FAh, FBh, F4h, FCh,
FDh, FFh
FFh
BIOS recovery succeeded, ready for
power-down, reboot.
Response
Warning
Pause
255
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SR4850HW4 - Server Platform - 0 MB RAM and is the answer not in the manual?