Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1372

Complete Software Guide for Junos
show lacp interfaces
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 184: show lacp interfaces Output Fields
Field Name Field Description
Aggregated interface Aggregated Ethernet interface value.
1276
®
OS for EX Series Ethernet Switches, Release 10.3
show lacp interfaces interface-name
Command introduced in Junos 10.0 for EX Series switches.
Display Link Aggregation Control Protocol (LACP) information about the specified
aggregated Ethernet or Gigabit Ethernet interface.
none—Display LACP information for all interfaces.
interface-name —(Optional) Display LACP information for the specified interface:
Aggregated Ethernet—
aex
Gigabit Ethernet— ge-fpc/pic/port
view
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch on page 970
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between
a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch on page 977
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 1157
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 1161
Understanding Aggregated Ethernet Interfaces and LACP on page 1099
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
show lacp interfaces (Aggregated Ethernet) on page 1279
Table 184 on page 1276 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
command.
show lacp interfaces
Copyright © 2010, Juniper Networks, Inc.