Pic-Mode - Juniper JUNOS OS 10.3 - SOFTWARE Manual

pic
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

pic-mode

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
pic pic-number {
sfpplus {
pic-modemode;
}
}
[edit chassis fpc slot]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Enable the specified port of the SFP+ uplink module to perform in the operating mode
specified by . The port is indicated by a Physical Interface Card (PIC) number.
pic-mode
—Number of the PIC. For uplink ports in EX3200 and EX4200 switches, the
pic-number
PIC number is always 1.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
pic-mode mode;
[edit chassis fpc slot pic pic-number sfpplus ]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Configure the operating mode for the specified port on the SFP+ uplink module on an
EX3200 or EX4200 switch.
—Operating mode of the SFP+ uplink module:
mode
1G —1-gigabit operating mode
—10-gigabit operating mode
10G
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
Chapter 55: Configuration Statements for Interfaces
1217