Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1365

Table 182: show interfaces xe- Output Fields (continued)
Field Name Field Description
Scheduler information for the CoS egress queues on the physical interface:
CoS Information
Direction
CoS transmit queue
forwarding class name.
Bandwidth
%
bps
Buffer
%
usec
nonzero only if the buffer size is configured in terms of time.
Priority
Limit
are
none
configured bandwidth, even if excess bandwidth is available. If
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Fields for Logical Interfaces
Name of the logical interface.
Logical interface
Index number of the logical interface, which reflects its initialization sequence.
Index
SNMP interface index number for the logical interface.
SNMP ifIndex
Unique number for use by Juniper Networks technical support only.
Generation
User-configured description of the interface.
Description
Information about the logical interface.
Flags
Encapsulation on the logical interface.
Encapsulation
Copyright © 2010, Juniper Networks, Inc.
—Queue direction, always
—Queue number and its associated user-configured
—Information about bandwidth allocated to the queue:
—Bandwidth allocated to the queue as a percentage
—Bandwidth allocated to the queue in bps
—Information about buffer space allocated to the queue:
—Buffer space allocated to the queue as a percentage.
—Buffer space allocated to the queue in microseconds. This value is
—Queue priority: or
low high
—Displayed if rate limiting is configured for the queue. Possible values
and . If is configured, the queue transmits only up to the
exact exact
Chapter 56: Operational Mode Commands for Interfaces
.
Output
.
none
Level of Output
extensive
is
brief
detail
extensive
none
detail
extensive
none
detail
extensive
none
detail
extensive
brief
detail
extensive
none
brief
detail
extensive
none
brief
detail
extensive
none
1269