Sfpplus - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

sfpplus

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1220
®
OS for EX Series Ethernet Switches, Release 10.3
sfpplus {
pic-modemode;
}
[edit chassis fpc slot pic pic-number]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Configure the operating mode for the specified port on the SFP+ uplink module on the
EX3200 or EX4200 switch.
The remaining statement is explained separately.
By default, the SFP+ uplink module operates in the 10-gigabit mode and supports SFP+
transceivers.
NOTE: The SFP+ uplink module provides two ports for 10-gigabit small
form-factor pluggable (SFP+) transceivers when configured to operate in
10-gigabit mode or four ports for 1-gigabit small form-factor pluggable (SFP)
transceivers when configured to operate in 1-gigabit mode.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
Copyright © 2010, Juniper Networks, Inc.