Show Ethernet-Switching Layer2-Protocol-Tunneling Statistics - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show ethernet-switching layer2-protocol-tunneling statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
1480
®
OS for EX Series Ethernet Switches, Release 10.3
show ethernet-switching-layer2-protocol-tunneling statistics
<interface interface-name>
<vlan vlan-name>
Command introduced in Junos OS Release 10.0 for EX Series switches.
Display Layer 2 protocol tunneling (L2PT) statistics for Layer 2 PDU packets received by
the switch.
NOTE: The
show ethernet-switching-layer2-protocol-tunneling statistics
command does not display L2PT statistics for Layer 2 PDU packets
transmitted from the switch.
none —Display L2PT statistics for all interfaces on which you enabled L2PT.
<interface interface-name>
<vlan vlan-name> —(Optional) Display L2PT statistics for the specified VLAN.
view
clear ethernet-switching layer2-protocol-tunneling statistics on page 1471
show ethernet-switching layer2-protocol-tunneling interface on page 1478
show ethernet-switching layer2-protocol-tunneling vlan on page 1483
show vlans on page 1507
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1368
Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure) on
page 1392
show ethernet-switching layer2-protocol-tunneling statistics on page 1481
show ethernet-switching layer2-protocol-tunneling statistics interface
ge-0/0/0.0 on page 1481
show ethernet-switching layer2-protocol-tunneling statistics vlan v2 on page 1481
Table 201 on page 1481 lists the output fields for the
layer2-protocol-tunneling statistics
order in which they appear.
—(Optional) Display L2PT statistics for the specified interface.
command. Output fields are listed in the approximate
show ethernet-switching
Copyright © 2010, Juniper Networks, Inc.