vlan
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
vlan-id
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
vlan {
members [ (all | names | vlan-ids) ];
}
[edit interfaces interface-name unit logical-unit-number family ethernet-switching]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Bind an 802.1Q VLAN tag ID to a logical interface.
The remaining statement is explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
show ethernet-switching interfaces on page 1235
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1312
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1379
Understanding Bridging and VLANs on EX Series Switches on page 1283
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
vlan-id number;
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an 802.1Q tag to apply to all traffic that originates on the VLAN.
If you use the default factory configuration, all traffic originating on the VLAN is untagged
and has a VLAN identifier of
—VLAN tag identifier.
number
Range: 0 through 4093.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1312
Understanding Bridging and VLANs on EX Series Switches on page 1283
Chapter 62: Configuration Statements for Bridging and VLANs
0
.
1465