Mvrp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

mvrp

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Understanding Bridging and VLANs on EX Series Switches on page 1283
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
mvrp {
disable
interface (all | interface-name) {
disable;
join-timer milliseconds;
leave-timer milliseconds;
leaveall-timer milliseconds;
registration (forbidden | normal);
}
no-dynamic-vlan;
traceoptions {
file filename <files number > <size size> <no-stamp | world-readable |
no-world-readable>;
flag flag;
}
}
[edit protocols]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure Multiple VLAN Registration Protocol (MVRP) on a trunk interface to ensure
that the VLAN membership information on the trunk interface is updated as the switch's
access interfaces become active or inactive in the configured VLANs.
The remaining statements are explained separately.
MVRP is disabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Automatic VLAN Administration Using MVRP on EX Series
Switches on page 1357
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1389
Chapter 62: Configuration Statements for Bridging and VLANs
1455