Leaveall-Timer - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

leaveall-timer

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1448
®
OS for EX Series Ethernet Switches, Release 10.3
leaveall-timer milliseconds;
[edit protocols gvrp]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For GARP VLAN Registration Protocol (GVRP), configure the interval at which Leave All
messages are sent on the interfaces. Leave All messages maintain current GVRP VLAN
membership information in the network. A Leave All message instructs the port to change
the GVRP state for all its VLANs to a leaving state and remove them unless a Join message
is received before the leave timer expires.
1000 centiseconds
—Number of milliseconds.
milliseconds
Range: 5 times
leave-timer
Default: 1000 centiseconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show gvrp on page 1497
Example: Configure Automatic VLAN Administration Using GVRP on page 1329
value
Copyright © 2010, Juniper Networks, Inc.