Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1437

Verification
Purpose
Action
Meaning
Purpose
Copyright © 2010, Juniper Networks, Inc.
}
}
vlans {
finance {
vlan-id 100;
}
lab {
vlan-id 300;
}
sales {
vlan-id 300;
}
}
To confirm that the configuration is updating VLAN membership, perform these tasks:
Verifying That GVRP Is Enabled on Access Switch A on page 1341
Verifying That GVRP Is Updating VLAN Membership on Switch A on page 1341
Verifying That GVRP Is Enabled on Access Switch B on page 1342
Verifying That GVRP Is Updating VLAN Membership on Switch B on page 1342
Verifying That GVRP Is Enabled on the Distribution Switch on page 1342
Verifying That GVRP Is Updating VLAN Membership on the Distribution
Switch on page 1343
Verifying That GVRP Is Enabled on Access Switch A
Verify that GVRP is enabled on the switch.
Show the GVRP configuration, using the
user@Access-Switch-A> show gvrp
Global GVRP configuration
GVRP status : Enabled
GVRP Timers (ms)
Join : 200
Leave : 600
LeaveAll : 10000
Interface Name Protocol Status
-------------- ---------------
xe-0/1/1.0 Enabled
The results show that GVRP is enabled on the trunk interface of Switch A and that the
default timers are used.
Verifying That GVRP Is Updating VLAN Membership on Switch A
To verify that GVRP is updating VLAN membership, display the Ethernet switching
interfaces and associated VLANs that are active on switch A:
Chapter 58: Examples: Bridging and VLAN Configuration
command:
show gvrp
1341