Drop-Threshold - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

drop-threshold

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1430
®
OS for EX Series Ethernet Switches, Release 10.3
drop-threshold number;
[edit vlans vlan-name dot1q-tunneling layer2-protocol-tunneling all | protocol-name]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Specify the maximum number of Layer 2 PDUs of the specified protocol that can be
received per second on the interfaces in a specified VLAN before the switch begins
dropping the Layer 2 PDUs. The drop threshold value must be less than or equal to the
shutdown threshold value.
NOTE: If the drop threshold value is greater than the shutdown threshold
value and you try to commit the configuration, the commit will fail.
You can specify a drop threshold value without specifying a shutdown threshold value.
No drop threshold is specified.
number —Maximum number of Layer 2 PDUs of the specified protocol that can be received
per second on the interfaces in a specified VLAN before the switch begins dropping
the Layer 2 PDUs.
Range: 1 through 1000
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
shutdown-threshold on page 1464
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1368
Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure) on
page 1392
Copyright © 2010, Juniper Networks, Inc.