ether-type
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
ether-type (0x8100 | 0x88a8 | 0x9100)
[edit ethernet-switching-options dot1q-tunneling]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure a global value for the Ethertype. Only one Ethertype value is supported at a
time. The Ethertype value appears in the Ethernet type field of the packet. It specifies
the protocol being transported in the Ethernet frame.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
dot1q-tunneling on page 1429
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1347
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1386
Chapter 62: Configuration Statements for Bridging and VLANs
1431