Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1442

Complete Software Guide for Junos
Configuration
CLI Quick
Configuration
Step-by-Step
Procedure
Results
Verification
Purpose
Action
1346
®
OS for EX Series Ethernet Switches, Release 10.3
will be configured administratively as the primary link. The trunk port
ge-0/0/9.0
will be the secondary link.
ge-0/0/10.0
To quickly configure the redundant trunk group
commands and paste them into the switch terminal window:
[edit]
set ethernet-switching-options redundant-trunk-group group-name group1
set ethernet-switching-options redundant-trunk-group group-name group1 interface ge-0/0/9.0
primary
set ethernet-switching-options redundant-trunk-group group-name group1 interface
ge-0/0/10.0
Configure the redundant trunk group
secondary links.
Configure the redundant trunk group
1.
[edit ethernet-switching-options]
user@switch# set redundant-trunk-group group-name group1
Configure the trunk port
2.
secondary link:
[edit ethernet-switching-options]
user@switch# set redundant-trunk-group group-name group1 interface ge-0/0/9.0
primary
user@switch# set redundant-trunk-group group-name group1 interface ge-0/0/10.0
Display the results of the configuration:
user@switch# show
ethernet-switching-options {
redundant-trunk-group {
group-name group1 {
interface ge-0/0/9.0 primary;
interface ge-0/0/10.0;
}
}
}
}
Verify that the redundant trunk group
Verifying That the Redundant Group Has Been Created on page 1346
Verifying That the Redundant Group Has Been Created
Verify that the redundant trunk group
trunk ports are members of the redundant trunk group.
List all redundant trunk groups configured on the switch:
user@switch> show redundant-trunk-group group1
on Switch 3, copy the following
group1
on Switch 3 and specify the primary and
group1
:
group1
as the primary link and
ge-0/0/9.0
has been created and is operating properly:
group1
has been created on the switch and that
group1
Copyright © 2010, Juniper Networks, Inc.
as the
ge-0/0/10