Interface - Juniper JUNOS OS 10.3 - SOFTWARE Manual

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
interface
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interface interface-name;
[edit routing-instances]
Statement introduced in Junos OS Release 9.2 for EX Series switches.
For virtual routing instances, configure an interface.
interface-name —Name of a Gigabit Ethernet interface.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Using Virtual Routing Instances to Route Among VLANs on EX Series Switches
on page 1354
Configuring Virtual Routing Instances (CLI Procedure) on page 1384
Understanding Virtual Routing Instances on EX Series Switches on page 1290
interface interface-name {
mapping (native (push | swap) | policy | tag (push | swap));
}
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option introduced in Junos OS Release 9.6 for EX Series switches.
mapping
Option introduced in Junos OS Release 10.0 for EX Series switches.
swap
For a specific VLAN, configure an interface.
—Name of a Gigabit Ethernet interface.
interface-name
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1305
Configuring VLANs for EX Series Switches (CLI Procedure) on page 1378
Understanding Bridging and VLANs on EX Series Switches on page 1283
Understanding Q-in-Q Tunneling on EX Series Switches on page 1293
Chapter 62: Configuration Statements for Bridging and VLANs
1441