Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1425

Meaning
Purpose
Action
Meaning
Related
Documentation
Example: Configure Automatic VLAN Administration Using GVRP
Copyright © 2010, Juniper Networks, Inc.
The output shows the
sales
Verifying the VLAN Members and Interfaces on the Distribution Switch
Verify that the and
sales support
List all VLANs configured on the switch:
user@switch> show vlans
Name Tag Interfaces
default
ge-0/0/1.0, ge-0/0/2.0, ge-0/0/3.0, ge-0/0/4.0,
ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0*, ge-0/0/8.0,
ge-0/0/9.0, ge-0/0/10.0*, ge-0/0/11.0, ge-0/0/12.0,
ge-0/0/13.0, ge-0/0/14.0, ge-0/0/15.0, ge-0/0/16.0,
ge-0/0/17.0, ge-0/0/18.0*, ge-0/0/19.0, ge-0/0/20.0,
ge-0/0/21.0, ge-0/0/22.0*, ge-0/0/23.0, ge-0/1/1.0*,
ge-0/1/2.0*, ge-0/1/3.0*
sales 100
ge-0/0/0.0*
support 200
ge-0/0/0.0*
mgmt
me0.0*
The output shows the
sales
Interface is the trunk interface connected to the access switch.
ge-0/0/0.0
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1305
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1312
Example: Configure Automatic VLAN Administration Using GVRP on page 1329
Understanding Bridging and VLANs on EX Series Switches on page 1283
As a network expands and the number of clients and VLANs increases, VLAN
administration becomes complex, and the task of efficiently configuring VLANs on multiple
EX Series switches becomes increasingly difficult. To automate VLAN administration,
you can enable GARP VLAN Registration Protocol (GVRP) on the network.
NOTE: Only trunk interfaces can be enabled for GVRP.
Chapter 58: Examples: Bridging and VLAN Configuration
and VLANs and the interfaces associated with them.
support
have been created on the switch.
and VLANs associated to interface
support
.
ge-0/0/0.0
1329