Verifying That Mac Notification Is Working Properly - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Meaning
Related
Documentation

Verifying That MAC Notification Is Working Properly

Purpose
Action
Meaning
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Invalid PDU received
New received
Join Empty received
Join In received
Empty received
In received
Leave received
LeaveAll received
MRPDU transmitted
MRPDU transmit failures
New transmitted
Join Empty transmitted
Join In transmitted
Empty transmitted
In transmitted
Leave transmitted
LeaveAll transmitted
The output of
show mvrp
participation as shown in the status in the
The output for
show mvrp statistics interface xe-0/1/1.0
are being transmitted and received on the interface.
Example: Configuring Automatic VLAN Administration Using MVRP on EX Series
Switches on page 1357
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1389
Verify that MAC notification is enabled or disabled, and that the MAC notification interval
is set to the specified value.
Verify that MAC notification is enabled while also verifying the MAC notification interval
setting.
user@switch> show ethernet-switching mac-notification
Notification Status: Enabled
Notification Interval: 30
The output in the
Notification Status
output in the
Notification Status
disabled.
The field output shows that the MAC notification interval is set to
Notification Interval
30 seconds.
Configuring MAC Notification (CLI Procedure) on page 1393
Chapter 60: Verifying Bridging and VLAN Configuration
: 0
: 2
: 1116
: 2219
: 2
: 2
: 1
: 1117
: 3280
: 0
: 0
: 1114
: 2163
: 1
: 1
: 1
: 1111
shows that interface
xe-0/1/1.0
Interface based configuration
field shows that MAC notification is enabled. The
field would display
is enabled for MVRP
field.
confirms that MVRP messages
if MAC notification was
Disabled
1405