Call Configuration Group Mibs; Ctpc Configuration Examples - Cisco CTS-500 Configuration Manual

Appendix A MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System

Call Configuration Group MIBs

Table A-7
Table A-7 Call Configuration Group MIBs
MIB
Trap Notification Enable
ciscoTpCallConfigurationGroup
Monitoring Threshold Configuration
ciscoTpCallConfigurationGroup
Monitoring Types
ciscoTpCallConfigurationGroup

CTPC Configuration Examples

Note Configure a longer period of time for snmpwalk to obtain the peripheral status in real time so that it will
not timeout. For example:

snmpwalk -t 10 <cts_ip> ctpPeripheralStatus
Trap Notification Enabling
#>snmpset cts1 ctpcStatNotifyEnable.0 i 1
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatNotifyEnable.0 = INTEGER: true(1)
Using default values
#>snmpset cts1 ctpcStatMonitoredStatus.latency.all i 5
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatMonitoredStatus.latency.all = INTEGER:
createAndWait(5)
#>snmpwalk cts1 CtpcStatMonitoredEntry
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatMonitoredUnit.latency.all = INTEGER: milliseconds(1)
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatRisingThreshold.latency.all = Gauge32: 200
OL-21851-01
lists Cisco TelePresence Call Configuration Group MIBs.
Type
ctpcStatNotifyEnable
•
ctpcMgmtSysConnNotifyEnable
•
ctpcStatRisingThreshold
•
ctpcStatFallingThreshold
•
ctpcStatStartupAlarm
•
• ctpcStatMonitoredStatus
latency.all (200ms)
•
jitter.video (20ms)
•
• jitter.audio (20ms)
• jitter.all (apply the thresholds for both video and audio streams)
• packetLoss.video (0.1%)
• packetLoss.audio (0.1%)
• packetLoss.all (apply the thresholds for both video and audio
streams)
• authFailurePacket.all (1)
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Cisco TelePresence Call (CTPC) MIBs
A-11