Enabling Delayed Traps Using Cisco Device Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 62 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 62-17
Step 2 Click Apply.

Enabling Delayed Traps Using Cisco Device Manager

To enable the delayed traps using Device Manager, follow these steps:
In Device Manager choose Admin > Events > Filters > Delayed Traps
Step 1
You can see the Events Filters information in the Information pane.
Click the Delayed Traps tab.
Step 2
Figure 62-18
Step 3 Check the Enable check box to enable delayed traps.
Delay interval will only be available when the feature is enabled.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Delayed Trap Dialog Box
Delayed Traps Dialog Box
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Configuring EMC E-mail Home Delayed Traps
62-23