Download Print this page

Omron SYSMAC CS1D-PD Series Operation Manual page 492

Duplex system

Advertisement

Replacing User-serviceable Parts
!Caution Do not short the battery terminals or charge, disassemble, heat, or incinerate
!Caution Dispose of any battery that has been dropped on the floor or otherwise sub-
!Caution Do not allow unqualified persons to replace batteries. UL standards required
!Caution Turn ON the power after replacing the battery for a CPU Unit that has been
452
the battery. Do not subject the battery to strong shocks. Doing any of these
may result in leakage, rupture, heat generation, or ignition of the battery.
jected to excessive shock. Batteries that have been subjected to shock may
leak if they are used.
that batteries be replaced only by experienced technicians.
unused for a long time. Leaving the CPU Unit unused again without turning
ON the power even once after the battery is replaced may result in a shorter
battery life.
Section 11-2

Advertisement

loading
Need help?

Need help?

Do you have a question about the SYSMAC CS1D-PD Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Sysmac cs1d-cpu ha seriesSysmac cs1d-cpu h seriesSysmac cs1d-cpu sa seriesSysmac cs1d-cpu s seriesSysmac cs1d-pa seriesSysmac cs series ... Show all