Omron SYSMAC CS1D-PD Series Operation Manual page 145

Basic I/O Units
Input Signal Width
Dimensions
2-11-4 CS-series Basic I/O Units with Connectors
(32-, 64-, and 96-pt Units)
High-speed input signals must meet the following conditions for the ON time.
ON OFF
Model
CS1W-IDP01
The High-speed Input Unit has the same dimensions as the Units with a 20-
terminal block.
CS-series Basic I/O Units are classified as Basic I/O Units.
Name
DC Input Unit
Transistor Output
Unit, Sinking
Transistor Output
Unit, Sourcing
DC Input/Transistor
Output Unit, Sinking
DC Input/Transistor
Output Unit, Sourc-
ing
TTL I/O Unit
Note Immediate refreshing is possible for the CS-series Basic I/O Units (with 32-,
64-, and 96-point connectors) using the IORF instruction.
ON time
0.1 ms min.
Specifications
24 V DC, 32 inputs
24 V DC, 64 inputs
24 V DC, 96 inputs
0.5 A at 12 to 24 V DC, 32 outputs CS1W-OD231 499
0.3 A at 12 to 24 V DC, 64 outputs CS1W-OD261 500
0.1 A at 12 to 24 V DC, with fuse
burnout detection circuit, 96 out-
puts
0.5 A at 24 V DC, load short-circuit
protection, 32 outputs
0.3 A at 24 V DC, load short-circuit
protection, 64 outputs
0.1 A at 24 V DC, with fuse burnout
detection circuit, 96 outputs
24 V DC input, 0.3 A output at 12
to 24 V DC, 32 inputs/32 outputs
24 V DC input, 0.1 A output at 12
to 24 V DC, with fuse burnout
detection circuit, 48 inputs/48 out-
puts
24 V DC input, 0.3 A output at 24 V
DC, load short-circuit protection,
32 inputs/32 outputs
24 V DC input, 0.1 A output at 24 V
DC, with fuse burnout detection cir-
cuit, 48 inputs/48 outputs
3.5 mA input at 5 V DC, 35 mA out-
put at 5 V DC, 32 inputs/32 outputs
Section 2-11
Model Page
CS1W-ID231 490
CS1W-ID261 491
CS1W-ID291 492
CS1W-OD291 501
CS1W-OD232 504
CS1W-OD262 506
CS1W-OD292 507
CS1W-MD261 509
CS1W-MD291 511
CS1W-MD262 513
CS1W-MD292 515
CS1W-MD561 517
105