Creating A Vpn Instance; Mce Configuration; Vpn Instance Configuration Task List - 3Com S7906E Configuration Manual

2

MCE Configuration

For detailed information on the routing protocol configuration mentioned in this chapter, see the IP
Routing Volume.
Configuring a VPN Instance

VPN Instance Configuration Task List

Complete the following tasks to configure a VPN instance:

Creating a VPN Instance

Associating an VPN Instance with an Interface
Configuring the Route-related Attributes for a VPN Instance
Creating a VPN Instance
A VPN instance needs to be associated with a site. A VPN instance does not correspond to a VPN
directly. Instead, a VPN instance is an integration of the VPN membership and routing rules of its
corresponding site.
A VPN instance takes effect only after a route distinguisher (RD) is configured for it. For a VPN instance
with the RD not configured, all the other settings (except the description information) are inaccessible.
The description information of a VPN instance can be used to record the relationship between the VPN
instance and a VPN.
Follow these steps to create a VPN instance:
To do...
Enter system view
Create a VPN instance and
enter VPN instance view
Configure an RD for the
VPN instance
Task
Use the command...
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
2-1
Remarks
Required
Required
Required
Remarks
—
Required
By default, no VPN instance is
present.
Required
By default, a VPN instance has no RD
configured.