Configuring Ipv6 Multicast Vlan Ports - 3Com S7906E Configuration Manual

To do...
Configure the current user
ports to permit packets of the
specified IPv6 multicast VLAN
to pass and untag the packets
For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to
VLAN Commands in the Access Volume.

Configuring IPv6 Multicast VLAN Ports

In this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user ports
to this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying the
IPv6 multicast VLAN on the user ports. These two methods give the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view
Assign port(s) to the IPv6
multicast VLAN
Configure IPv6 multicast VLAN ports in terface view or port group view
Follow these steps to configure IPv6 multicast VLAN ports in interface view or port group view:
To do...
Enter system view
Configure the specified
VLAN as an IPv6 multicast
VLAN and enter IPv6
multicast VLAN view
Return to system view
Enter interface view or port
Use the command...
port hybrid vlan vlan-id-list
{ tagged | untagged }
Use the command...
system-view
multicast-vlan ipv6 vlan-id
port interface-list
Use this command...
system-view
multicast-vlan ipv6 vlan-id
quit
interface interface-type
interface-number
1-6
Remarks
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
Remarks
—
Required
No IPv6 multicast VLAN
configured by default
Required
By default, an IPv6 multicast
VLAN has no ports.
Remarks
—
Required
Not an IPv6 multicast
VLAN by default.
—
Required