You can specify up to eight security policy servers for a RADIUS scheme.
Enabling the Listening Port of the RADIUS Client
Follow these steps to enable the listening port of the RADIUS client:
Enter system view
Enable the listening port of the RADIUS
client
Displaying and Maintaining RADIUS
To do...
Display the configuration
information of a specified
RADIUS scheme or all RADIUS
schemes
Display statistics about RADIUS
packets
Display information about
buffered stop-accounting
requests that get no responses
Clear RADIUS statistics
Clear buffered stop-accounting
requests that get no responses
Configuring HWTACACS
Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.
To do...
display radius scheme
[ radius-scheme-name ] [ slot
slot-number ]
display radius statistics [ slot
slot-number ]
display stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
reset radius statistics [ slot
slot-number ]
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
Use the command...
system-view
radius client enable
Use the command...
1-30
Remarks
—
Optional
Enabled by default
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in user
view
Available in user
view