Specifying A Security Policy Server; Enabling The Listening Port Of The Radius Client - 3Com 4500G Family Configuration Manual

The accounting-on feature needs to cooperate with the iMC network management system.

Specifying a Security Policy Server

The core of the EAD solution is integration and cooperation, and the security policy server system is the
management and control center. As a collection of software, the security policy server system provides
functions such as user management, security policy management, security status assessment, security
cooperation control, and security event audit.
This configuration task is to specify the IP address of a security policy server. After that, the access
device only accepts control packets sent from the specified IP address. If the iMC configuration platform,
the authentication server and the security policy server use the same IP address, you need not
configure this task.
To implement EAD, you need to use the security-policy-server command to specify the IP addresses
of the iMC policy server and iMC configuration platform.
Follow these steps to specify a security policy server:
To do...
Enter system view
Create a RADIUS scheme and
enter its view
Specify a security policy server
You can specify up to eight security policy servers for a RADIUS scheme.

Enabling the Listening Port of the RADIUS Client

Follow these steps to enable the listening port of the RADIUS client:
Enter system view
Enable the listening port of the RADIUS
client
Use the command...
system-view
radius
radius-scheme-name
security-policy-server ip-address
To do...
scheme
Use the command...
system-view
radius client enable
1-30
Remarks
—
Required
By default, no RADIUS scheme is
present.
Required
Not specified by default
Remarks
—
Optional
Enabled by default