Ipv6 Multicast Vlan Configuration Task List - 3Com S7906E Configuration Manual

Figure 1-3 Port-based IPv6 multicast VLAN
After the configuration, upon receiving an MLD message on a user port, Switch A tags the message with
the IPv6 multicast VLAN ID and relays it to the MLD querier, so that MLD Snooping can uniformly
manage the router ports and member ports in the IPv6 multicast VLAN. When forwarding multicast data
to Switch A, Router A needs to send only one copy of multicast traffic to Switch A in the IPv6 multicast
VLAN, and Switch A distributes the traffic to all the member ports in the IPv6 multicast VLAN.
For information about MLD Snooping, router ports, and member ports, refer to MLD Snooping
Configuration in the IP Multicast Volume.
For information about VLAN tags, refer to VLAN Configuration in the Access Volume.

IPv6 Multicast VLAN Configuration Task List

Complete the following tasks to configure IPv6 multicast VLAN:
Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
Configuring Port-Based IPv6
Multicast VLAN
Configuring the Maximum Number of Forwarding Entries in IPv6 Multicast
VLANs
Configuration task
Configuring User Port Attributes
Configuring IPv6 Multicast VLAN Ports
1-3
Remarks
Required
Use either approach.
Optional