Connecting The Patient Circuit; Connect An Active Exhalation Valve Patient; Circuit - Breas Vivo 45 LS User Manual

2 Make sure a clicking sound is heard
to ensure the power supply is
completely inserted.
3 Connect the power supply's power
cord to the mains supply.
To isolate the Vivo 45 LS from the mains supply, disconnect the power supply.
4.4

Connecting the Patient Circuit

WARNING!
Read 2.4 Usage of Patient Circuit, page 26 carefully to make sure all conditions are con-
sidered and met.
The Vivo 45 LS can be used with the following circuits:
• Single limb circuit with external active exhalation valve
• Single limb circuit with external leakage port
• Single limb circuit connected to patient interface with integrated leakage port
• Circuit with mouthpiece interface
4.4.1 Connect an Active Exhalation Valve Patient Circuit
This kind of patient circuit should not be be used in MPV mode.
1 Inspect the circuit for damages.
48 Preparing the Vivo 45 LS for Use
User manual
Doc. 007301 K-1