Using The Ventilator With The Ptcco 2 Cable - Breas Vivo 45 LS User Manual

Cleaning
WARNING!
•
•
•
•
•
•
Clean the outside of the CO
ethanol or isopropyl alcohol (< 70%).
Disposal
The CO
tions regarding the disposal of used equipment and waste.
5.7.6 Using the ventilator with the PtcCO
An external monitor for Transcutaneous CO
the ventilator by an accessory PtcCO
cables, see 9 Accessories and Parts, page 181.
NOTE
Both the PtcCO
CO
2
When connected, the ventilator will:
•
•
•
•
Doc. 007301 K-1
Always be careful when cleaning to ensure that you do not damage any equipment.
Fluid must not be allowed to enter into the CO
Always clean the T-piece with plug when to be used by a new patient. All parts
that come into contact with the respiration gas must be cleaned.
Remove the airway adapter before cleaning.
Do not sterilise the CO
Do not autoclave the CO
sensor must be disposed of in accordance with the local environmental regula-
2
cable and the EtCO
2
port. Only one CO measuring device can be connected at a time.
2
Display the monitored values and include them in trend views.
Store monitored values in the internal memory. The PtcCO
included in the data that can be downloaded and analysed with Breas PC software.
Repeat CO alarms from the external PtcCO
2
Automatically detect the sensor, also after powering off/on or after power failure
sensor.
2
sensor.
2
sensor using a lint-free cloth moistened, but not wet, with
2
Cable
2
Pressure (PtcCO
2
cable. For information about available PtcCO
2
sensor connects at the ventilator's yellow
2
2
sensor.
2
) may be connected to
2
values will also be
2
monitor.
How to Use the Vivo 45 LS
User manual
2
105