Emission And Immunity Declaration - Breas Vivo 45 LS User Manual

Miscellaneous
Maximum flow: > 300 l/min
Maximum flow at 20 mbar: > 150 l/min
Maximum limited pressure during single fault condition: 80 cmH2O (PCV, PSV &
VCV) 30 cmH2O (CPAP)
Breathing resistance under single-fault: <6 cmH2O at 30 l/min, <6 cmH2O at 60
l/min
Bias-flow when using active exhalation valve: 8 l/min
Vivo 45 LS Dimensions
W × H × D: 216 × 159 × 152 mm
Weight: 2.4 kg
Patient air outlet: 22 mm male, conical standard connector
EtCO
2
W × H × D: 8 × 37 × 34 mm
Cable length: 2.4 m
Weight: 75 g
Warm-up time: 10 s
Total system response time: 30 s
Interference from medical gases: O
(calibrated at 21% O
FiO Sensor
2
Total system response time : 20 s
Filtering/Smoothing Techniques
Pressure: Low pass average time constant 16 ms
Inspiration trigger: Differential mass flow resolution 4 ms
Expiration trigger: Flow low pass filtering with level sensing
SpO : No data post-processing done by the ventilator
2
8.3

Emission and Immunity Declaration

The Vivo 45 LS does not have RF equipment or intended RF communications.
172 Technical Specifications
User manual
Sensor
)
2
: <-0.1% relative CO
2 2
per % O
2
Doc. 007301 K-1