Breas Vivo 65 Quick Reference Manual

Vivo 65
Quick Reference Guide
Quick Usage Guide
This is not a complete guide for the
Vivo 65. See your manual for complete
instructions.
Turning the Vivo 65 On and Off
Turn On and Enter Operating Mode
1. Make sure the power
source is connected
and secured by the
restraining clip.
2. Turn on the Vivo 65
and enter Standby
mode by pressing the
Standby button on the
side panel.
3. To start treatment and
enter operating mode,
press and hold the
Start/Stop button on
the front panel.
Release the Start/
Stop button when the
progress bar is filled.
Human Design Medical
1-844-848-6872
Stopping Treatment and Turning Off
1. To stop treatment and
enter Standby mode,
first press and hold the
Start/Stop button on
the front panel.
2. Release the Start/
Stop button when the
progress bar is filled.
3. Press the Audio Pause
button within 10
seconds. Press the
button firmly.
4. When the Vivo 65 is
not in an active
treatment mode, press
the Standby button
on the side panel to
change the unit to a
low power standby
state.
Företagsvägen 1 · SE-435 33 Mölnlycke · Sweden
Phone +46 31 86 88 00
www.breas.com
1