Item 1 in the figure: AC/DC power supply
b) If using DC power, connect the DC plug to the DC power outlet:
Item 2 in the figure: DC/DC power supply
CAUTION!
Make sure that the power outlet is not
blocked, so that the cord can be
unplugged without difficulties.
5.4
Connecting the Patient Circuit
WARNING!
Read the chapter 2.4 Patient Circuit — Warnings and Precautions, page 22 Carefully to
make sure all conditions are considered and met.
The Vivo 3 is intended to be used with leakage circuits only. Recommended leak rate:
20 to 50 liters per minute at 10 cmH
Doc. 007232 Y-2
1
O.
2
Prepare the Vivo 3 for Use 65
Vivo 3 Clinician's Manual