Cleaning And Maintenance; Cleaning The Vivo 45 Ls - Breas Vivo 45 LS User Manual

7

Cleaning and Maintenance

WARNING!
The Vivo 45 LS should be subjected to maintenance, service and control and any
applicable upgrades, in accordance with Breas service instructions.
The Vivo 45 LS shall only be repaired or modified in accordance with Breas service
manuals, technical bulletins, and any special service instructions, by service techni-
cians that have been authorised after Breas Vivo 45 LS service training.
Do not under any circumstances attempt to service or repair the ventilator yourself.
If you do so, the manufacturer will no longer be responsible for the performance
and safety of the ventilator.
Deviation from these service instructions may lead to risk of personal injury!
The patient-connected parts and the filter must be cleaned and replaced regularly to
ensure correct function of the ventilator. All replaced parts must be disposed of in
accordance with local environmental regulations regarding the disposal of used equip-
ment and waste.
7.1

Cleaning the Vivo 45 LS

WARNING!
To avoid electrical shock, disconnect the power supply to the ventilator before clean-
ing. Do not immerse the ventilator into any fluids.
CAUTION!
Always be careful when cleaning to ensure that you do not damage any equipment.
Fluid must not be allowed to enter the ventilator.
Never apply any liquids directly on the ventilator by spraying, splashing or pouring.
Use a moistened lint-free cloth when cleaning.
Do not use an excessive amount of liquid when cleaning the ventilator.
Do not autoclave the ventilator.
156 Cleaning and Maintenance
User manual
Doc. 007301 K-1