Using Accessories; Connecting And Disconnecting The Cables - Breas Vivo 45 LS User Manual

• Both AC power supply and external DC using the Y-cable.
With both AC power supply and external DC source connected, the ventilator will auto-
matically switch over to the external DC source if the AC power supply fails. The exter-
nal DC voltage level is shown under "Others", "Device Information" in the menu
1 Connect the external DC cable to
the ventilator. Make sure that it is fitted
correctly.
2 Connect the other end of the cable to the DC source.
5.7

Using Accessories

5.7.1

Connecting and Disconnecting the Cables

1 Insert the cable in the appropriate
port.
2 Make sure to insert the connector
with the marking pointing upwards.
96 How to Use the Vivo 45 LS
User manual
Doc. 007301 K-1