Using The Ventilator With The Etco 2 Sensor - Breas Vivo 45 LS User Manual

5.7.5 Using the ventilator with the EtCO
The EtCO
in order to monitor and store CO
stored in the ventilator data memory which can be downloaded to a PC and viewed in
the ventilator PC software.
More information about safety, warnings, product description, installation, usage,
cleaning, maintenance and technical specifications can be found in the user instruc-
tion for the EtCO
5.7.5.1 Safety Information
WARNING!
Read the instructions thoroughly so that you completely understand how the EtCO
sensor is operated before taking it into use, to ensure correct usage and maximum
performance.
Breas Medical reserves the right to make changes to this product without any prior
notification.
Do not use a damaged CO
The CO
only.
The CO
in conjunction with other assessments of clinical signs and symptoms.
Masks' dead-space, patient's volumes and unintentional leakage may influence the
CO measurements.
2
Used airway adapters shall be disposed of in accordance with local regulations for
medical waste.
Measurements can be affected by mobile and RF communications equipment. It
should be assured that the CO
specified in 8.3 Emission and Immunity Declaration, page 172.
100 How to Use the Vivo 45 LS
User manual
sensor can be connected to the patient breathing circuit and to a Vivo 45 LS
2
sensor.
2
sensor or adapter.
2
sensor is intended to be used by authorized and trained medical personnel
2
sensor is intended only as an adjunct in patient assessment. It must be used
2
2
Sensor
2
measurements. The CO
2
sensor is used in the electromagnetic environment
measurements will be
2
2
Doc. 007301 K-1