CAUTION!
•
•
4.3
Connecting the Vivo 45 LS to Mains
WARNING!
Read 2.2 Electrical Safety, page 23 carefully to make sure all conditions are considered
and met.
1 Plug the power supply into the
power inlet of the Vivo 45 LS.
Doc. 007301 K-1
Do not place the Vivo 45 LS on a soft surface that will prevent the air flow under-
neath the device.
Never cover the device.
Always position the Vivo 45 LS so the power supply lays on a surface without
strain to the power cord. The power supply shall be easy to disconnect, if required
to isolate the Vivo 45 LS from the mains.
Preparing the Vivo 45 LS for Use
47
User manual