Using The Ventilator With The Remote Alarm - Breas Vivo 45 LS User Manual

3 Insert the FiO
electrical contact side in.
4 Reinstall the hatch.
5 Calibrate the FiO
When installed, the ventilator automatically detects the sensor, also after powering
off/on and after power failure.
5.7.3.2 Calibrating the FiO
The FiO
FiO
the Advanced settings section of the main menu.
5.7.4

Using the ventilator with the Remote Alarm

Information about safety, warnings, product description, installation, usage, cleaning,
maintenance and technical specifications can be found in the user instruction for
Remote Alarm.
The Remote Alarm enables care providers and clinical personnel to monitor the ventila-
tor alarms remotely. The Remote Alarm forwards alarms from the ventilator. When an
alarm sounds, the care provider or clinical personnel must attend to the patient quickly.
When installing a remote alarm system, check that it operates as intended before starting
the treatment.
Doc. 007301 K-1
sensor with the
2
sensor in the advanced settings of the main menu.
2
sensor
2
sensor should be calibrated when first used and then at least once a month.
2
calibration can be performed from the "FiO
2
/CO Calibration" page under
2 2
How to Use the Vivo 45 LS
User manual
99