Using The Ventilator With A Nurse Call; System; Using The Ventilator With The Fio 2 Sensor - Breas Vivo 45 LS User Manual

3 Pull the connector sleeve, not the
cable itself or cable restrainer to release
the connector.
5.7.2 Using the ventilator with a Nurse Call System
The ventilator can be connected to a nurse call system using the nurse call cable. When
connected, the ventilator alarms will also be forwarded to the nurse call system.
5.7.2.1 Connect the ventilator to a Nurse Call System
1 Connect the nurse call cable at the
back of the ventilator.
2 Test the connection by triggering an alarm on the ventilator and verify that the
nurse call system activates.
5.7.3 Using the ventilator with the FiO
The FiO
sor measures the fraction of inspired oxygen in the air channel of the ventilator. The
Doc. 007301 K-1
sensor can be used to monitor and store FiO
2
Sensor
2
measurements. The FiO
2
How to Use the Vivo 45 LS
sen-
2
97
User manual