Wago I/O Field App; Table 23 Function Overview For The Wago I/O Field Webserver For Digital Input/Output Modules - WAGO 765-1103/100-000 Manual

Functions
• Update Bluetooth
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Menu
Dashboard
Ports X01, X02 etc.
Settings
DIO Forcing
User Administration
Sign in,
Sign out
The functional scope described can vary depending on the module type.

5.5.3 WAGO I/O Field app

The WAGO I/O Field app is an app for maintenance, diagnostics, operation and monitor-
ing of installed WAGO I/O System Field modules and IO-Link devices.
This app allows you to display product information, read and write process data and ad-
just settings and parameters for both fieldbus modules and IO-Link devices. The commu-
nication this requires takes place through the Bluetooth
once a Data Matrix code has been scanned to select the product.
28 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
®
firmware
Table 23: Function Overview for the WAGO I/O Field Webserver for Digital Input/Output Modules
Tab
-
(All)
Information
Status
Configuration
Process Data
(All)
Device Configuration
Maintenance Information
Firmware Upgrade
Factory Reset
®
Bluetooth
-
-
-
Description Section
Display product informa-
tion
8 Configure Ports
Port information and set-
tings for ports X01, X02, ... [} 62]
Display current measured
values for port (tempera-
ture, voltage, current and
state on pins 1, 2 and 4)
Display status information
for the entire port
Make port settings (such
as operating mode or
product check for valida-
tion and backup)
Display the process data
(input/output)
Product Settings
Configure parameters for 8 Configuring IP Param-
IP connection eters [} 63]
8 Storing Maintenance
Save maintenance infor-
mation Information [} 64]
Update firmware 8 Updating Firmware
[} 99]
Reset the product to fac- 8 Resetsetting the Mod-
tory settings ule to the Factory Set-
tings [} 67]
®
Access via Bluetooth 8 Configure Bluetooth
[} 68]
Forcing for digital inputs 8 Forcing Digital Inputs
and outputs and Outputs [} 73]
8 Logging Users on and
Set up and manage users
off and Managing Them
Log users on and off
[} 70]
®
interface of the mobile device
765-1103/100-000