2-Channel Pulse Width Modules; Table 81: Module Types - 2-Channel Pulse Width Output Modules; Table 82: Submodule Types And Data Lengths - 2-Channel Pulse Width Output - WAGO 750-370 Manual

164 Appendix
14.1.6.2

2-Channel Pulse Width Modules

There is one module type for the 2-channel pulse width modules.
Table 81: Module Types – 2-Channel Pulse Width Output Modules
Module type
2PWM
Pulse width output modules receive the provider status (IOPS) from the IO
controller and supply it with the consumer status (IOCS) of the received output
information in case only the actual user data is exchanged. If all existing
information is available in the process image of the inputs and outputs, the process
data qualifiers are also transmitted in the opposite direction.
There are the following submodule types for the 2-channel pulse width modules.
Table 82: Submodule Types and Data Lengths – 2-Channel Pulse Width Output Module
PNIO module type
PNIO submodule type
2PWM
2PWM
2PWM, EM
Description
2-Channel Pulse Width Output Modules,
16 bits output data per signal channel
Data type
Integer16
{Unsigned8,
Unsigned16}
750-370 PROFINET IO Fieldbus Coupler
Substitute I/O modules
75x-511,
plus all variations
Process data length [byte]
Input (I-PI) Output (O-PI)
0 4
6 6
WAGO-I/O-System 750
Telegram
allocation [byte]
Input Output
1 5
8 8
Manual
Version 2.0.0