Pulse Width Modules; Serial Interface Modules With Alternative Data Format; Table 154: Pulse Width Modules 750-511, (And All Variations), 753-511 - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch
Output Process Image
Offset
0
1
2
3
11.2.5.2

Pulse Width Modules

750-511, (and all variations),
753-511
The above Pulse Width modules have a total of 6 bytes of user data in both the
Input and Output Process Image (4 bytes of channel data and 2 bytes of control/
status). The two channel values are supplied as 16 bits. Each channel has its
own control/status byte. The following table illustrates the Input and Output
Process Image, which has a total of 4 words mapped into each image. Word
alignment is applied.

Table 154: Pulse Width Modules 750-511, (and all variations), 753-511

Input and Output Process
Offset
0
1
2
3
11.2.5.3

Serial Interface Modules with Alternative Data Format

750-650, (and the variations /000-002, -004, -006, -009, -010, -011, -012, -013),
750-651, (and the variations /000-001, -002, -003),
750-653, (and the variations /000-002, -007),
753-650, -653
The process image of the / 003-000-variants depends on the parameterized
operating mode!
With the freely parameterizable variations /003 000 of the serial interface
modules, the desired operating mode can be set. Dependent on it, the process
image of these modules is then the same, as from the appropriate variation.
The above Serial Interface Modules with alternative data format have a total of 4
bytes of user data in both the Input and Output Process Image (3 bytes of serial
data and 1 byte of control/status). The following table illustrates the Input and
Byte Designation
High Byte
-
D1
-
D3
Byte Designation
High Byte
-
D1
-
D3
Low Byte
C0 Control byte of Counter 1
D0 Counter Setting Value of Counter 1
C1 Control byte of Counter 2
D2 Counter Setting Value of Counter 2
Low Byte
C0/S0 Control/Status byte of Channel 1
D0
C1/S1 Control/Status byte of Channel 2
D2
I/O Modules 173
Description
Description
Data Value of Channel 1
Data Value of Channel 2
Manual
Version 1.2.1