Ssi Transmitter Interface I/O Modules; Distance And Angle Measurement; Table 300: Ssi Transmitter Interface Modules With Alternative Data Format; Table 301: Incremental Encoder Interface I/O Module - WAGO -I/O-SYSTEM 750 XTR Manual

WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
12.3.5.2

SSI Transmitter Interface I/O Modules

The process image depends on the parameterized operating mode!
The operating mode of the configurable I/O module can be set. Based on the
operating mode, the process image of these I/O modules is then the same as
that of the respective version.
In the input process image, SSI transmitter interface modules with status occupy
4 data bytes. Two words are assigned in the process image via word alignment.

Table 300: SSI transmitter interface modules with alternative data format

Input process image
Instance
n
n+1
These specialty modules represent 2x2 bytes and occupy 2 instances in class
(0x67).
12.3.5.3

Distance and Angle Measurement

The incremental encoder interface I/O module appears with 6 bytes of reference
data in the input and output area of the process image, 4 data bytes and two
additional control/status bytes. Four words are assigned in the process image via
word alignment.

Table 301: Incremental Encoder Interface I/O module

Input and Output Process Image
Instance
n
n+1
These specialty modules represent 2x3 bytes and occupy 2 instances in class
(0x67) and 2 instances in class (0x68).
Pos : 102.6 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Byte designation
High byte
D1
D3
Byte designation
High byte
-
D1
-
D3
Low byte
D0
D2
Low byte
C0/S0 Control/status byte of channel 1
D0 Data values of channel 1
C1/S1 Control/status byte of channel 2
D2 Data values of channel 2
I/O Modules 247
Remark
Data bytes
Remark
Manual
Version 1.3.0