Marking; Table 3 Explanation Of The Marking Example - WAGO 750 XTR Series System Manual

750 XTR Series

3.1.4.2 Marking

The marking on the products includes the terminal allocation, the serial number and infor-
mation on approvals.
No.
1
2
3
4
5
6
7
8
System manual | Version: 2.0.0
Content
WAGO logo and address
Product information
Terminal allocation
"Ex" registration icon
CE mark
"ESD" mark
"KC" registration icon
"CCC" mark
Figure 7: Example Marking of XTR I/O Module
Table 3: Explanation of the Marking Example
Description
WAGO GmbH & Co. KG
Item number and product description; conductor
cross-section if applicable
For more information on connections, see the re-
& Product
spective Manual.
The product meets the classified requirements ac-
cording to ATEX for operation in hazardous areas.
For more information on the topic of Approvals, see
& Product
the respective Manual.
With the CE mark, WAGO declares that the product
meets the applicable requirements as set out in
Community harmonization legislation per EC Regu-
lation 765/2008, which allows the product to carry
this mark.
Note: Avoid electrostatic discharge!
The products are equipped with electronic compo-
nents that may be destroyed by electrostatic dis-
charge when touched. Please following the safety
precautions to prevent electrostatic discharge per
DIN EN 61340-5-1/-3.
This approval mark indicates compliance with Ko-
rean product safety requirements for electrical and
electronic devices and components.
With the CCC (China Compulsory Certification)
mark, WAGO declares that the product meets the
applicable requirements according to standards valid
for the Chinese market.
System Features
19